High Frequency Infrared Carbon and Sulfur Analyzer Model HW2000B

HW2000B High-Frequency Infrared Carbon and Sulfur Analyzer

I. Instrument Overview

The HW2000B High-Frequency Infrared Carbon and Sulfur Analyzer can quickly and accurately determine the mass fractions of carbon and sulfur in steel and its alloys, casting core sand, non-ferrous metals, rare earth metals, carbides, cement, ores, coke, catalysts, glass, ceramics, and other metallic and non-metallic materials. This instrument uses a high-frequency induction heating furnace to combust samples and employs infrared absorption methods for accurate carbon and sulfur content testing. This equipment incorporates advanced foreign technology, integrating optics, mechanics, electronics, computer science, and analytical techniques into a new technological product. It features a wide measurement range, strong anti-interference capability, comprehensive functions, simple operation, and accurate and reliable analysis results.

II. Main Technical Parameters

1. Measurement Range:

Carbon: 0.0001%-10.0000% (expandable to 99.9999%)

Sulfur: 0.0001%-3.5000% (expandable to 99.9999%)

2. Analysis Error: Complies with GB/T20123-2006/ISO15350:2000 standards

3. Sensitivity (read to the smallest digit): 0.00001% (m/m) (0.01 ppm)

4. Analysis Precision (repeatability):

Carbon: σn-1 ≤ 0.0002% (m/m) or CV ≤ 1%

Sulfur: σn-1 ≤ 0.0002% (m/m) or CV ≤ 2%

Refer to highly reliable standard steel samples.

Perform empty burning treatment on the crucible for more than 30 minutes at 1000°C.

5. Analysis Time: Adjustable from 25 to 60 seconds, typically 35 seconds

6. High-Frequency Furnace Power: 2.2KW/20MHz

7. Electronic Balance: Non-quantitative sample weighing, reading accuracy: 0.1mg

8. Working Environment: Indoor temperature: 10-30°C; Relative humidity: less than 90%

9. Oxygen: Purity ≥ 99.5%, input pressure 0.18MPa ± 5%

10. Power Supply: Requires good grounding, voltage AC220V ± 5%; frequency 50Hz ± 2%

III. Main Features

1. Modular design of the entire machine improves instrument reliability.

2. Utilizes low-noise, high-sensitivity, and high-stability infrared detectors.

3. Full Chinese Windows operating interface, easy to operate and master.

4. Comprehensive software functions, providing over 40 features including system diagnostics, channel selection, mathematical statistics, and result correction.

5. Full-range linear calibration technology, weight linear compensation technology, etc.

6. Dynamic display of various data during the analysis process and carbon and sulfur release curves.

7. Reasonable high-frequency circuit design, adjustable high-frequency furnace power, suitable for different material sample analysis requirements.

8. Furnace head automatic cleaning device reduces the impact of dust on analysis results.

9. Furnace head heating device ensures consistent sulfur conversion rates, improving the stability of sulfur determination.

10. Electronic balance automatic online analysis reduces weighing errors and increases analysis speed.